Our products

Test benches
Entirely developed by the group’s engineering department, these innovative and high-tech products represent the future of alternator and starter testing and are the most complete and successful solutions on the world market.

Products

ONYX Tester

Automatic test bench for 12V / 24V alternators and starters

The ONYX Tester, real spearhead of INTITEK FOR MANUFACTURING, is the most complete and innovative solution on the global market, and represents the future of the universal smart test equipment for 12/24V alternators and starters.

Thanks to its advanced computer technology, its integratedscalable database with over 200 000 alternator references and its mechanical design carefully studied, the ONYX Tester allows complete control of all alternator signals in less than 1 min with a total security for the operator.

Accessible to both novices and experts, this user-friendly tool, with its modern and intuitive interface, brings an operating proof of the products tested, and prevents warranty returns of smoothly running units.

Its powerful built-in calculator checks all signals delivered by alternators, including computerized serial communication protocols as BSS, LIN 1&2, RVC, PCM, C Terminal… 

The ONYX Tester can be easily updated via Internet/Ethernet connection or USB key, in order to remain at the cutting edge of emerging technologies.

« Complete control of all alternator signals in 

less than 1 min »

Technical brochure ONYX Tester

Technical Features

Design

Dimensions : 800 x 520 x 450 mm
Weight : 90 kg
Screen : Touch screen 10,4 ’’

Hardware

Power supply : 220 V, 50/60 Hz, 2.24kW
Rotation Speed : Test speed : 3000 rpm, 2 directions of rotation
Batteries : 2 Batteries 12V / 45Ah integrated, automatic charge control
Cords : Set of specific connectors for alternators
Belts : Trapezoidal and Poly-V belts supplied
Printer : Built-in thermal printer
Connection : USB / Internet / Ethernet

Test

Tested products : All types of 12V and 24V alternators (without power limitation), all types of 12V and 24V starters.
Measured parameters : Leakage current – Lamp circuit – Control function – RPM output – Ripple voltage – Regulation voltage – “Sense” function – Alternator current – DF/DFM signal
Communication protocols : LIN (1.3, 2.0, 2.1), BSD/BSS (1, 2), RVC, C Terminal, PCM
Database : More than 200 000 alternator references, upgradeable and updated.
Starter Tests : Complete electrical test, freely rotating, no load
Automatic Mode : Deep Auto Diagnostics at Fixed Speed and Fixed Load (40-50A)
Simple Manual Mode : Endurance Tests, Customized Tests
Print Results : Detailed test report with the simple sanction “Good or Defective”.
Operating System : Windows CE, graphical user interface (GUI) touchscreen

Others

Languages : Numerous languages available (Chinese, Hungarian, Czech, English, German, French, Portuguese, Italian, Polish, Spanish)
Production : Made in France, CE Certified
Warranty : 1 year warranty, parts and labour – return to workshop + telephone assistance

New videos 2020

Products

TITANE Tester

Computerized test bench for 12V / 24V alternators and starters

The TITANE Tester, true working tool for automotive professionals, is the most robust, modern and complete test bench on the global market to control and diagnose the most recent 12/24V alternators and starters.

Thanks to its 11 CV motor with electronic speed control and its powerful load capacity up to 300A for alternators, The TITANE Tester is the universal solution to fulfill the expectations of rebuilders, electrical repairers, wholesalers and training centers.

Its powerful built-in calculator checks all signals delivered by alternators, including computerized serial communication protocols as BSS, LIN 1&2, RVC, PCM, C Terminal…

The full automatic mode is simple and accessible to all through a scalable database with over 200 000 references alternators. The manual operating mode allows to perform all specific and custom tests by using the full capabilities of the test bench.

The TITANE Tester can be easily updated via Internet/Ethernet connection or USB key, in order to remain at the cutting edge of emerging technologies.

 

« State-of-the-art test equipment for fast and comprehensive diagnostics »

Technical brochure TITANE Tester

Technical Features

Design

Dimensions : 1200 x 1300 x 600 mm
Weight : 250 kg
Display : 10.4″ touch screen

Hardware

Power supply : 380-440 V, three-phase (with neutral) 50/60 Hz, 8.2kW
Rotation Speed : Variable test speed from 0 to 6000 rpm, 2 directions of rotation
Batteries : 2 built-in 12V / 45Ah Batteries, Automatic charge control
Cords : Set of specific connectors for alternators
Belts : Trapezoidal and Poly-V belts supplied
Printer : Built-in thermal printer
Connection : USB / Internet / Ethernet

Test

Tested products : All types of 12V and 24V alternators (without power limitation), all types of 12V and 24V starters.
Measured parameters : Leakage current – Lamp circuit – Control function – RPM output – Ripple voltage – Regulation voltage – “Sense” function – Alternator current – DF/DFM signal
Communication protocols : LIN (1.3, 2.0, 2.1), BSD/BSS (1, 2), RVC, C Terminal, PCM
Database : More than 190,000 alternator references, upgradeable and updated.
Automatic Mode : Full diagnostics at actual load up to 300 A
Manual mode : Endurance test, Parameterizable tests
Starter Tests : Complete electrical test, freely rotating, no load
Print Results : Detailed test report with the simple sanction “Good or Defective”.
Operating System : Windows CE, graphical user interface (GUI) touchscreen

Others

Languages : Numerous languages available (Chinese, Hungarian, Czech, English, German, French, Portuguese, Italian, Polish, Spanish)
Production : Made in France, CE Certified
Warranty : 1 year warranty, parts and labour – return to workshop + telephone assistance

New videos 2020

Products

DRAGON Tester

Brand-new Automated Testing machine for 12-24V Starters : Full Load test

The Dragon Tester is the latest modern solution available on the market for testing starter motors with an accurate, automated and powerful innovative solution. The key benefits of this innovative product reside in the universal ways of operation, and in the optimized interchangeability between different starters.

The supply of 12V and 24V for starters is assumed by a custom-made internal 30kW power supply developped by the INTITEK group engineers, and this exclusive solution allow to test continuously starters in large series.

This starter test bench has been designed to test units up to 9 kW within a full load operating mode thanks to an electrical braking system.
The Dragon Tester is totally computerized and allow users to print and save online test reports with performance curves. It can be easily updated via Internet/Ethernet connection or USB key, in order to remain at the cutting edge of emerging technologies.

 

« Full load self-test for starters up to 9kW »

Technical brochure Dragon Tester

Technical Features

Design

Dimensions : 800 x 520 x 450 mm
Weight : 450 kg
Display : 10.4″ touch screen

Hardware

Power supply : 380-440V three-phase with neutral, 50/60Hz
Input power : 0-30 kW
Starter output power : 0-9 kW
Starter voltage : 12V / 24V
Starter current : 0 – 1200 A
Starter current peak : 2200 A
Starter torque : 0 – 350 Nm
Solenoid current : 0 – 150 A

Test

Automatic Mode : In-depth analysis and performance :

         – Solenoid Test :Voltage Drop / Inrush Voltage and Current / Holding Voltage and Current

         – Starter test : Free-running current / Free-running speed / Max current / Max torque / Ripple current

         – Perf. Curves :Voltage / Current / Power / Torque / Efficiency

Precise diagnosis with test interpretation : SUCCESS or FAILURE

Others

Direction of rotation : clockwise / counter-clockwise
Driving force : Adaptable sprocket wheel – optional sizes
Braking system : Electrically operated disc brake
Fastening : Adaptive quick fastening system
Connectivity : USB / Internet / Ethernet

New videos 2020

Clients

Professionals trust us

Footer